Home | About Us | Products | Equipments | Contact Us

VOLTAWELD V-6013
AWS Specification: E6013
JIS Specification: D4313
Other Specification: DIN E4342R(C)3

Applications:

Mild steel fabrications, Steel windows and iron grills and fences, container steel, welding of ungalvanized pipes, steel structures for houses, steel chairs and tables, steel ladders and other light gauge mild steels and others.

Characteristics:

SMOKE and ODORLESS

FEW and FINE SPATTERINGS

STEADY and SMOOTH ARC

SELF REMOVING SLAG reduces cleaning time

STRONG and HIGH QUALITY WELD METAL properties

Notes on Usage:

(1) Pay attention not to exceed the range of proper currents. Welding with excessive current not only lowers X-ray soundness, but also causes increase of spatter, under-cut and insufficient slag covering.

(2) Dry the electrodes at 70-100 degrees C for 30-60 minutes before use. Excessive moisture absorption lowers usability and may result in some porosities.

(3) Excessive drying before use causes less in penetration and overheating of the electrode.

Typical Chemical Composition of Weld Metal (%):

C

Mn

Si

P

S

0.07

0.41

0.32

0.012

0.010

Typical Mechanical Properties of Weld Metal:

Yield Point

N/mm2 (Kgf/mm2)

Tensile Strength

N/mm2 (Ksi)

Elongation

(%)

Impact Value

Deg C, J (Deg F, Ft-lbs)

430 (62)

480 (70)

28

0,65 (32,48)

Size and Recommended Current Range (AC or DC +/-):

Diameter (mm)

1.6

2.0

2.5

3.2

4.0

5.0

Length (mm)

275

275

350

350

400

400

Ampere

Flat

20-45

30-65

60-95

90-130

120-170

150-220

V&OH

20-45

30-65

60-62

90-130

125-160

125-190

Welding Positions:

ALL POSITIONS INCLUDING VERTICAL DOWN

Approvals:

ABS, BV, DNV, LRS

Packing:

20 Kg corrugated box, with 4 units of 5 Kg shrinked plastic wrapped paper boxes inside.

Special requests on packing are accepted.

 

 

 

HEADQUARTERS Syracuse, New York Tel. (966) 399-3414